Press Releases | ZIRCAR Refractory Composites, Inc.

ZRCI Introduces 99% High Alumina Materials

Type RS-99’s high Alumina content is ideal for high vacuum, reducing atmospheres and other applications where silica cannot be tolerated, such as in Solid Oxide Fuel Cells and setters for P/M and MIM sintering applications. Refractory Sheet Type RS-99 is available in three versions:

Type RS-99M is a highly plastic moldable sheet ideally suited for forming custom geometry.
Type RS-99W boards can be moistened with water and molded into any desired shape. After low temperature bake-out of 300°C (570°F) material is unaffected by moisture.
Type RS-99R boards are prefired and are unaffected by moisture. They remain rigid even if saturated with water.

Please go to our web site www.zrci.com for more information on the Type RS-99R or any of our high temperature products. For more information please contact:

ZIRCAR Refractory Composites, Inc.
P.O. Box 489
Florida, NY, 10921 USA
Phone: (845) 651-2200 Fax: (845) 651-1515
email: sales@zrci.com

admin1515 Mar 14, 2016 Press Releases Comments Off Read More

Zrci Rs-100 A Fiber Reinforced Structural Alumina Composite

ZIRCAR Refractory Composites, Inc., (ZRCI) Florida, NY is proud to announce the introduction of Refractory Sheet Type RS-100 in new larger size boards. It is now available in 48” x 48” as a standard size.

Refractory Sheet Type RS-100 is a fiber reinforced structural Alumina composite with useful properties in thermal, structural and electrical insulation applications, as well as in the transport of molten non-ferrous metals to 1260OC(2300OF). Type RS-100 has compressive and flexural strengths in the range of high temperature reinforced plastics, such as G-10 laminates, but retains its strength and utility to levels far exceeding the maximum use temperatures of plastics. The mechanical properties of RS-100 exceed those of all calcium-silicate materials, as well as Transite and other asbestos cement materials, over all temperature ranges. Therefore, Type RS-100 not only makes an excellent replacement for rigid asbestos-containing products, but it can also be employed at much higher temperatures. Type RS-100 is 100% inorganic, non-flammable and contains no asbestos. Its high Alumina content makes it highly resistant to many environments, including molten non-ferrous metals, and it undergoes no out-gassing upon heating. It is not brittle and has high impact properties. RS-100 may be cut and machined with standard tooling.

Please go to our web site www.zrci.com for more information on the Type RS-99R or any of our high temperature products. For more information please contact:

ZIRCAR Refractory Composites, Inc.
P.O. Box 489
Florida, NY, 10921 USA
Phone: (845) 651-2200 Fax: (845) 651-1515
email: sales@zrci.com

admin1515 Mar 13, 2016 Press Releases Comments Off Read More

ZRCI Introduces New Lower Cost Alumina Ceramic Composite Type RS-1200

ZIRCAR Refractory Composites, Inc., Florida, NY is proud to announce the introduction of Refractory Sheet Board Type RS-1200.

ZIRCAR Refractory Sheet Type RS-1200 is a high strength composite designed for use as thermo-mechanical and electrical insulation in applications with temperatures as high as 1300°C(2372°F). RS-1200 is a combination of strong reinforcing fibers tightly bound in an alumina ceramic matrix. RS-1200 is completely inorganic and contains no asbestos or RCF fibers. RS-1200 exhibits greater refractoriness and homogeneity than other reinforced alumina matrix composite products and can be readily machined to tight tolerances with conventional carbide tooling.

Please go to our web site www.zrci.com for more information on the Type RS-99R or any of our high temperature products. For more information please contact:

ZIRCAR Refractory Composites, Inc.
P.O. Box 489
Florida, NY, 10921 USA
Phone: (845) 651-2200 Fax: (845) 651-1515
email: sales@zrci.com

admin1515 Mar 12, 2016 Press Releases Comments Off Read More